Why This Upgrade Question Keeps Coming Up Anyone who's installed a run of SG04 or SG05 units knows ...
READ MORE

The Deye SUN-10K-SG01HP3-EU-AM2 is a high-voltage three-phase hybrid inverter for larger residential and small commercial storage systems. Compared with 48V storage, the HV battery architecture reduces current at the same power level, which is helpful for higher-power projects with longer cable runs and stricter efficiency targets.
Why it is useful in system design:
High-voltage lithium battery support improves power handling and keeps DC current under control.
AC-coupling and generator support provide flexibility for both new builds and retrofit projects.
Time-based battery control supports peak shaving, self-consumption and backup reserve strategies.
Parallel operation allows staged capacity expansion as the customer’s site load grows.
The 10kW rating makes this model suitable for PV-plus-storage projects where power density, three-phase output and professional energy management are more important than lowest upfront cost.
| Parameter Item | Specification |
| Rated AC Input/Output Active Power | 10,000 W; Max AC Apparent Power: 11,000 VA |
| Battery Compatibility & Parameters | Lithium-ion high voltage; Battery voltage range 160–700 V; 1 battery input; Max charge/discharge current 50 A |
| PV Input Power Rating | Max PV access power 20,000 W; Max PV input power 16,000 W |
| PV Voltage Range | Max 1,000 V; Start-up 180 V; MPPT range 150–850 V; Rated DC voltage 600 V |
| MPPT Configuration | 2 MPPT; Max operating current up to 26+20 A; Short-circuit current up to 39+30 A |
| AC Side Specifications | 220/380 V or 230/400 V, 3L+N+PE; THDi <3%; Peak power 1.5× rated power for 10s |
| Efficiency & Protection Features | Max 97.6%; Euro efficiency 97.0%; MPPT efficiency >99%; IP65; Type II DC/AC SPD |
Recommend suitable products and configuration plans based on customers' power demand, application scenarios and budget.

Provide system-level combination suggestions for inverters, energy storage, batteries and supporting products.

All products undergo factory inspection and necessary testing before shipment.

Recommend suitable products and configuration plans based on customers' power demand, application scenarios and budget.

Offer product and system operation training for installers and project parties.
Why This Upgrade Question Keeps Coming Up Anyone who's installed a run of SG04 or SG05 units knows ...
READ MOREThree Constraints That Should Drive Your Inverter Choice Most inverter comparisons start with a spe...
READ MOREEurope crossed a symbolic threshold in 2025: cumulative installed battery energy storage capacity p...
READ MOREA commercial building in Frankfurt swaps its curtain-wall cladding for photovoltaic glass. A homeow...
READ MOREA residential roof in Porto has twelve panels. Three of them sit behind the chimney during the late...
READ MORE