The Jump From One Cabinet to a Site-Wide Storage Plant A single MC-L430-2H3 cabinet delivers 430.08...
READ MORE

The Deye SUN-10K-SG02LP1-EU is a low-voltage hybrid inverter for residential and light-commercial storage projects where PV generation, battery storage and backup supply need to work as one system. It uses a 48V battery architecture, so it remains practical for installers working with common residential LFP battery stacks.
Commercial points worth highlighting:
Time-of-use charge and discharge scheduling helps shift solar energy to evening demand and higher-tariff periods.
AC-coupling support makes the unit suitable for retrofits where an existing PV inverter is already installed.
Diesel generator input is useful for weak-grid and backup sites that cannot rely on PV and battery alone.
Parallel operation allows the system to be expanded without replacing the original inverter.
The 10kW rating is a strong fit for homes, villas, small offices and shops that need dependable self-consumption plus backup capability rather than a basic grid-tie-only inverter.
| Parameter Item | Specification |
| Rated AC Input/Output Active Power | 10,000 W; Max AC Apparent Power: 11,000 VA |
| Battery Compatibility & Parameters | Lead-acid or lithium-ion; 40–60 V; 1 battery input; Max charge/discharge current 220 A |
| PV Input Power Rating | Max PV access power 20,000 W; Max DC input power 16,000 W |
| PV Voltage Range | Max 500 V; Start-up 125 V; MPPT range 150–425 V; Rated DC voltage 370 V |
| MPPT Configuration | 3 MPPT; 3/2+2+2; Max operating current 26+26+26 A; Short-circuit current 44+44+44 A |
| AC Side Specifications | 220/230 V, L+N+PE; THDi <3%; Max continuous AC passthrough 60 A |
| Efficiency & Protection Features | Max 97.6%; MPPT efficiency >99%; IP65; Type II DC/AC SPD; Operating temperature -40 to +60°C; Intelligent air cooling |
Recommend suitable products and configuration plans based on customers' power demand, application scenarios and budget.

Provide system-level combination suggestions for inverters, energy storage, batteries and supporting products.

All products undergo factory inspection and necessary testing before shipment.

Recommend suitable products and configuration plans based on customers' power demand, application scenarios and budget.

Offer product and system operation training for installers and project parties.
The Jump From One Cabinet to a Site-Wide Storage Plant A single MC-L430-2H3 cabinet delivers 430.08...
READ MORETwo Cabinets, One Battery Chemistry, Very Different Wiring Diagrams Walk up to an MC-L430-2H3 and a...
READ MOREWhy Safety Architecture Decides Whether a C&I Battery Cabinet Survives Ten Years A 430kWh liqui...
READ MORESeven Wiring Diagrams, One Decision Framework The same MS-G215/GS215 cabinet can be wired seven dif...
READ MOREWhy a Battery Cabinet Needs Six Independent Safety Layers, Not One A 215kWh LFP cluster packed into...
READ MORE