The Jump From One Cabinet to a Site-Wide Storage Plant A single MC-L430-2H3 cabinet delivers 430.08...
READ MORE

The Deye SUN-75K-SG02HP3-EU-EM4/EM6 is a high-voltage three-phase hybrid inverter for commercial and industrial hybrid systems. Compared with 48V storage, the HV battery architecture reduces current at the same power level, which is helpful for higher-power projects with longer cable runs and stricter efficiency targets.
Why it is useful in system design:
High-voltage lithium battery support improves power handling and keeps DC current under control.
AC-coupling and generator support provide flexibility for both new builds and retrofit projects.
Time-based battery control supports peak shaving, self-consumption and backup reserve strategies.
Parallel operation allows staged capacity expansion as the customer’s site load grows.
The 75kW rating makes this model suitable for PV-plus-storage projects where power density, three-phase output and professional energy management are more important than lowest upfront cost.
| Parameter | Specification |
| Rated AC Input/Output Active Power | 75,000 W |
| Maximum AC Apparent Power | 82,500 VA |
| Battery Type | High‑voltage lithium‑ion battery |
| Battery Voltage Range | 160–1,000 V |
| Number of Battery Inputs | 2 |
| Maximum Charge/Discharge Current | 80+80 A |
| Maximum PV Access Power | 150,000 W |
| Maximum PV Input Power | 120,000 W |
| Maximum PV Voltage | 1,000 V |
| PV Startup Voltage | 180 V |
| MPPT Operating Voltage Range | 150–850 V |
| Rated PV Voltage | 650 V |
| Number of MPPT Trackers | 6 |
| PV String Configuration | 6 / 2+2+2+2+2+2 |
| Maximum MPPT Operating Current | 36×6 A |
| MPPT Short‑circuit Current | 54×6 A |
| AC Rated Voltage | 220/380 V or 230/400 V, 3L+N+PE |
| Maximum AC Pass‑through Current | 200 A |
| Total Harmonic Current Distortion (THDi) | < 3% |
| Peak Efficiency | 98.70% |
| Euro Efficiency | 98.10% |
| MPPT Efficiency | > 99% |
| Ingress Protection | IP65 |
| Surge Protection Device | Type II DC/AC SPD |
| Cooling Method | Intelligent Air Cooling |
Recommend suitable products and configuration plans based on customers' power demand, application scenarios and budget.

Provide system-level combination suggestions for inverters, energy storage, batteries and supporting products.

All products undergo factory inspection and necessary testing before shipment.

Recommend suitable products and configuration plans based on customers' power demand, application scenarios and budget.

Offer product and system operation training for installers and project parties.
The Jump From One Cabinet to a Site-Wide Storage Plant A single MC-L430-2H3 cabinet delivers 430.08...
READ MORETwo Cabinets, One Battery Chemistry, Very Different Wiring Diagrams Walk up to an MC-L430-2H3 and a...
READ MOREWhy Safety Architecture Decides Whether a C&I Battery Cabinet Survives Ten Years A 430kWh liqui...
READ MORESeven Wiring Diagrams, One Decision Framework The same MS-G215/GS215 cabinet can be wired seven dif...
READ MOREWhy a Battery Cabinet Needs Six Independent Safety Layers, Not One A 215kWh LFP cluster packed into...
READ MORE